TP-Link TD-W8960ND

CONFIGURING TP-LINK TD-W8960ND


Setting up your Kiwilink internet connection

1. Download firmware

Download the latest firmware from: https://www.tp-link.com/en/download/TD-W8960N.html

Download the firmware by clicking the link

2. Extract and run

Extract the file 

3. Enter TP-Link’s IP address into your web web-browser IP number (192.168.1.1)

Log in: Username: admin Password: admin

4. Select Management from the side bar

5. Select Upgrade Firmware from the sidebar, select Choose File and select the extracted firmware and click Update Firmware.


How to configure your modem to Kiwilink

1. Enter TP-Link’s IP address into your web web-browser IP number (192.168.1.1)

Log in: Username: admin Password: admin

2. Click ‘Advanced Setup’ on the sidebar.

3. Click WAN Service

4. Click the remove box and select Remove.

5.  Select ATM Interface from the sidebar and also remove it.​

5.1.  Now click Add​

5.2. Enter the following and click Save/Apply, you will be taken to another screen to confirm.​

6. Go back to WAN Service​

7. Click Add

8. Click next

9. Match the settings with the below, replacing the username and password with your credentials.

10. Click next​

11. Click next​

12. Click Save/Apply


How to Configure Wireless

1. Click Wireless

2. Fill in the below

3. Click Security on the sidebar.

Click Apply/Save and you’re done.

Quick Support